Concrete cutting in Norfolk NE - clean, straight cuts right where you need them
Need a trench line, a new opening or a broken panel cut out? We cut it clean, in the right place, with dust kept down.
Slabs and floors
Flat sawing for driveways, patios, sidewalks and garage floors.
Walls and openings
A track-mounted wall saw where a floor saw can't work.
Checked before cutting
We find what's buried in the concrete before the blade.
Wet cutting
Water on the blade keeps dust down around your house.
How do you get a concrete slab or wall cut in Norfolk?
Concrete cutting in Norfolk means sawing clean lines through a slab or wall for a trench, a doorway, a repair or the edge of a section that's coming out, and Norfolk Concrete Company does it with the saw that fits the surface.
The surface decides the saw. Floors, driveways and sidewalks get a flat saw that rides along the slab. Walls get a wall saw, a diamond blade that runs on a track mounted to the wall, because a floor saw can't work upright. So when you call, tell us what the concrete is and where it sits.
The price moves with the length and depth of the cut, whether there's steel in the concrete and whether the work is indoors. The schedule turns mostly on what's buried in it, since a slab that may hold rebar, the steel rods that strengthen it, or pipes and wiring gets scanned before the first cut. Your written estimate lists each step and what's included.
- The right saw for the surface
- A scan before the first cut
- Wet cutting to hold down dust
- Clean edges ready for a new pour
When does a slab or wall need cutting?
Look into cutting when part of a slab has to come out, something has to go through the concrete, or new work has to meet old.
A broken or sunken panel
A straight saw cut frees one bad section so it can come out and be replaced, the same way we'd pour a new concrete driveway.
A trench for a new line
A new drain, water line or conduit under a floor needs a narrow strip cut out before anyone can dig.
A new opening in a wall
A basement window or doorway through a concrete wall takes a wall saw, so the edges come out square.
New concrete meeting old
When a new concrete patio ties into an older slab, a clean cut gives a straight edge to pour against.
Water running toward the house
A slab that tips water at your foundation sometimes needs a section cut out and poured back with the right fall.
A new slab needing joints
Control joints are shallow cuts that give cracks a straight place to go, and they need cutting early, before cracks pick their own spot.
Get a quote for your cut
Tell us what needs cutting, where it is and whether it's indoors. We'll reply within one business day to set up a free, no-obligation look on site.
What I check before any concrete cutting
Before I recommend a cut, I want to know what the concrete is, where it sits and what might be buried in it, because that decides the saw and the steps.
The surface and its depth
A slab gets a flat saw and a wall gets a track saw, and thicker or steel-filled concrete takes longer to cut.
What's buried inside
Rebar, pipes, conduit or tensioned cables have to be found before the blade goes in, so when the concrete calls for it, a scan comes first.
Indoors or outdoors
Cutting in a basement or garage changes how the saw is powered and how we protect the room, so we settle that on the visit.
What comes after the cut
If the cut leads to digging or a new pour, I look at the base and drainage too, so the new section doesn't settle or hold water.
How a concrete cutting job runs
We plan the cut around what's in the concrete and how you use the space, so before we start you know what the saw will do and what will be left.
You call or write
Call or send the form with what needs cutting, and we'll set a time for me to come out.
I come out
I look at the slab or wall, ask what you want cut and check for anything buried that needs a scan first.
Written estimate
You get an estimate that lists each step, from any scan to the cut to cleanup, and what's included.
The cut
Once you say go, we schedule around the weather and our own crew cuts wet, with me on the job alongside them.
Walk-through
We walk the finished cut with you, so you can see the edges and where everything ended up before we leave.
Why Norfolk homeowners call Norfolk Concrete Company for concrete cutting
You get the person who wrote your estimate on the job, a crew that checks before it cuts, and satisfaction guaranteed on every job.
The owner writes your estimate
I come out, look at the job and write the estimate myself, and I'm on site with our own crew when we cut.
Trained on a finishing crew
I learned concrete on a finishing crew and started this business in 2023, after years running lawn and snow work in Norfolk.
Fully licensed and insured
Nebraska requires contractors to register with the Nebraska Department of Labor, though the department says registration alone doesn't vouch for the quality of the work.
Calls returned, plans in writing
My old business taught me a returned call and clear paperwork matter as much as the work, so call (402) 844-1238 and let's get started.
Concrete cutting in Norfolk and the cities around it
When a cut leads to digging, like a trench for a new line, Nebraska law requires notice to the one-call center at least two full business days, and no more than ten, before the digging starts, so we build that wait into the schedule. If you work on your own property or have work done there, the state's registration law doesn't count you as a contractor.
We're based in Norfolk and work in Wayne and the other cities around it. Frost and wet springs move a lot of slabs here, so many of our cutting calls are for settled driveway panels, basement openings and trenches for new lines, and the work goes the same in town or out on an acreage.
Got a slab or wall that needs a clean cut?
(402) 844-1238Concrete cutting questions we hear
How much does concrete cutting cost in Norfolk, NE?
Saw cutting an accessible 4- to 6-inch slab usually costs about $4 to $10 per linear foot across the US. Reinforced or deeper slabs cost more per foot, and nearly every cutting job carries a trip, half-day or day minimum because setup costs about the same for one cut or many. Your written estimate shows the figure for your job.
How do I get an accurate quote for concrete cutting?
Tell us what surface needs cutting and where it sits, whether it's indoors, whether the pieces need hauling off and whether the slab might hold post-tension cables. That's enough for me to know which saw to bring and what to check first.
Is it safe to cut a slab that has post-tension cables?
Not until the cables are found, because cutting one, a steel cable pulled tight inside the slab, releases thousands of pounds of stored tension at once and can collapse the slab. If there's any doubt, the slab gets scanned before the blade goes in.
What is the best way to keep dust down when cutting concrete indoors?
Cut wet, because water on the blade substantially reduces the dust a saw makes, and that's how we cut. Indoors we also talk through how the saw is powered before we book, since a gas saw puts out carbon monoxide that isn't safe in a closed room like a basement.
Will cutting out part of my driveway damage the rest of the slab?
Not when the cut is planned, because a full-depth saw line gives a clean break so the bad panel comes out without cracking its neighbors. When we pour the new section, we dig out and pack the base so it sits level with the rest.
Does concrete cutting include hauling the pieces away?
Not always, since sawing and removing concrete are separate jobs and a cutter may leave the cut panels in place. Tell us which you want, and the estimate will spell it out.
Ask Norfolk Concrete Company about your cut
A call now gives us time to check what's in the concrete well before the day you need the cut made.